On-site electrostatic painting
Cladding and spandrel respray
Refresh suitable aluminium cladding, spandrel panels, fascias and capping without treating a finish update as a building compliance remedy. Electrocoat scopes onsite coating work for commercial builders, strata properties and councils, with access planned around the building.
SWMS & insurance certificates available on request
What cladding and panels can be resprayed?
Suitable aluminium cladding, metal spandrel panels, fascias and capping can be assessed for onsite respraying. The service is for commercial builders, strata managers and council property teams renewing the appearance of existing metal building elements.
The material and current finish must be identified before a coating system is proposed. A panel described as cladding may have a different construction from neighbouring metalwork. We assess the paintable surface and visible condition, while questions about panel composition or building compliance need the appropriate building specialist.
How are facade surfaces prepared and coated?
Preparation starts with checking adhesion, cleaning the surfaces and assessing failed coating or corrosion. Suitable areas are then prepared, protected and coated with a liquid paint system selected for the substrate and exposure.
Electrocoat uses Kremlin electrostatic spray equipment for suitable metal surfaces. Glazing, joints, adjoining finishes and areas outside the scope need careful protection. Existing coating defects may require more preparation than a simple colour refresh. We establish those requirements before treating a large elevation as one uniform painting surface.
How long does a cladding respray take?
Timing depends on the area, height, access arrangements and condition of the existing finish. Weather and the selected coating system also influence when exterior preparation and painting can proceed.
Large elevations may be divided into stages to manage access and the use of the building below. Deliveries, occupied tenancies and public entrances can affect that sequence. We discuss practical work windows and weather-related constraints when planning the project, rather than promising the same turnaround for every facade or assuming uninterrupted exterior access.
How are access and compliance handled?
The access method suits the building, with EWP, scaffold or rope access options considered where appropriate. Availability, suitability and any specialist arrangements need assessment rather than assuming one method can reach every panel.
Cladding compliance questions are separate from coating and belong with the building’s certifier. Painting does not establish compliance or resolve questions about panel composition. If the building has an unresolved cladding issue, clarify the approved scope before commissioning appearance work. Access planning also needs to account for pedestrians, neighbouring property and the building’s daily operation.
How long will the facade coating last?
Coating life depends on surface preparation, system compatibility and exposure. Sun, coastal conditions, drainage and the shape of projecting fascias or capping can create different demands across the same building.
We assess visible corrosion and coating failure before recommending a finish. Areas that collect moisture or have underlying defects need attention beyond a new colour. Suitable cleaning and inspection help maintain the finish after handover. Expected care requirements are discussed for the proposed system, and our written warranty terms are confirmed in your quote.
What affects cladding respray pricing?
The main cost drivers are surface area, building height, access and the extent of preparation or repair. Masking around windows, joints and adjoining materials can be a substantial part of the scope.
An EWP setup and a restricted facade requiring specialist access create different planning requirements. Colour changes may need more coats than a same-colour refresh. Occupied buildings, staged work and after-hours requirements also influence pricing. Elevation drawings, photographs and known access restrictions help us prepare for an onsite assessment, but the condition of the actual surfaces still needs review.
Should panels be resprayed or replaced?
Respraying is an option when the panels are suitable to retain and the problem is the surface finish. Replacement needs separate consideration where panels are damaged, unsuitable or part of a required building rectification scope.
A coating cannot correct defective fixings, water entry or a panel system that needs replacement. Those questions should be resolved with the responsible building professionals before colour work is scheduled. Keeping the scopes separate helps builders and owners compare a cosmetic refurbishment with the actual repairs or replacement the building may require.
Preparation & application
How your respray comes together
Define the coating scope
Identify the metal elements, current finish and known building issues with the project contact. Request relevant information about the panels and refer unresolved compliance questions to the building’s certifier.
Assess access and preparation
Review elevation access, public protection and preparation requirements. Discuss the access method appropriate to the building and establish how coating stages will fit around occupants, deliveries and other trades.
Complete staged refinishing
Prepare and coat the agreed surfaces in the planned sequence. Review accessible finished areas with the nominated representative and provide coating care information, keeping any separate building repair responsibilities clear.
Project evidence
Related metal refinishing work
The photograph shows a multi-storey balustrade finished in Metallic Medium Bronze in Sydney. It illustrates related architectural metal coating work, not cladding, spandrel panels, facade access equipment or a cladding compliance project.
Questions
Cladding & spandrel respray: your questions answered
Does painting resolve a cladding compliance issue?
No. Cladding compliance questions are separate from coating and belong with the building’s certifier. Establish any required assessment or rectification before treating a colour change as the next step.
Can the panels stay on the building?
Suitable panels may be coated in place when preparation, access and protection can be managed. Loose panels, damaged fixings or other building defects need separate assessment before painting proceeds.
Can you match adjacent facade metalwork?
We can assess a reference finish and discuss a sample. Weathering, surface texture and viewing angle can affect the apparent match across different elevations or materials, particularly with metallic finishes.
Can you paint above an occupied entrance?
That depends on safe access and protection arrangements. The programme may require a temporary exclusion area, an alternative entrance or different working hours, agreed with the building representative before work begins.
Explore your options
Related services & areas
Related services: Architectural metalwork, Powder coat repairs and Window frame respraying. See our Sydney service area or commercial & council work.
Helpful guides
Before you decide: read these
Respray preparation and adhesion testing: how it's done properly
Sound preparation needs a substrate assessment, compatible products and agreed checks. Learn how test patches, cross-cut testing and film thickness records support an onsite respray specification.
Read guide StrataWindows & balustrades in your capital works plan: respray vs replace
Prepare a useful scope and comparable committee quotes.
Read guideDon't replace it. Electrocoat it.
Free onsite quote, no obligation, across Sydney, Melbourne, Brisbane & the Gold Coast. Send a few photos and we'll tell you what it takes.